Description
Caractéristiques techniques
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Wet maximum | suitable | |
| Manufacturers designation | ONMU 05T6 ANER | |
| Dry machining | suitable only under restricted conditions | |
| Oil | suitable | |
| Air | suitable only under restricted conditions | |
| Base form | square | |
| Wide insert B | 3 mm | |
| Thickness of the insert S | 6.1 mm | |
| Length of cutting insert L | 3 mm | |
| Insert version | neutral | |
| Length of cutting edge l | 3 mm | |
| Height of cutting edge | 5.795 mm | |
| Diameter of the cutting insert d | 14 mm | |
| Corner radius R | 0.8 mm | |
| Corner chamfer angle | 45 degrees | |
| Corner angle | 135 degrees | |
| Rake angle | 30 degrees | |
| Normal clearance angle (main cutting edge) | 0 degrees | |
| Normal clearance angle (auxiliary cutting edge) | 0 degrees | |
| Normal clearance angle (flat cutting edge) | 0 degrees | |
| Cutting conditions | interrupted | |
| Cutting edge length, limited | 3 mm | |
| ISO-Code | ONMU 05T6 ANER | |
| Tool material | Carbide | |
| Cutting media, manufacturers designation | HB8630 | |
| Coating | TiAlN | |
| Grade | HB8630 | |
| Insert thickness T | 6.1 mm | |
| Type of fastening for insert | S (with counterbore screwed through hole) | |
| Interface coding for insert | ONMU 05T6 ANER | |
| Interface coding for insert according to ISO TS 13399-60 | ONMU 05T6 ANER | |
| Insert designation | ONMU 05T6 ANER | |
| Type of product | Cutter insert | |
| With ISO code | yes | |
| Standard | DIN ISO 1832 | |
| Number of teeth | 16 pcs. | |
| Direction of action | right-hand | |
| Suitable for material | stainless steel (M) | |
| Tolerance Class | M | |
| Machining method | face milling (FPL) | |
| Finishing / roughing assignment | Finishing; Roughing | |
| Type of fastening | Hole | |
| Chip breaker | yes | |
| Cutter version | sharp-edged (F) | |
| Cutting conditions | continuous | |
| Number of potential uses | 16 pcs. | |
| Weight | 10 g | |
| Content | 1 pcs. | |
| Correction factor fz | 2.5 |
Identification et classification
| Référence article | 213435 INOX | |
| EAN / GTIN | 4045197747822 | |
| Réf. fabricant | 213435 INOX | |
| Fabricant/personne responsable | Hoffmann Supply Chain GmbH & Co. KG, Poststra?e 15, 90471 Nürnberg, Deutschland, |
Tableau dapplication
» data-src= ».9/7/9/6/9796af6a-8f9b-48f2-9e9a-71b67515869c/ap60_at_fra_inox-kl900n.png » alt= »INOX < 900 N/mm2" ="lazy" />
