Description
Caractéristiques techniques
| Cooling lubricant | no | |
| Wet minimum | unsuitable | |
| Series | GARANT Master Uni | |
| Wet maximum | unsuitable | |
| Interface position | on the machine | |
| Holder type | Plain shank | |
| Dry machining | suitable | |
| Shank diameter DS | 6 mm | |
| Shank length LS | 34 mm | |
| Oil | suitable only under restricted conditions | |
| Air | suitable | |
| Tool material | Carbide | |
| Machining group | M (stainless steel); N (non-ferrous metals); P (steel) | |
| Coating | TiAlN | |
| Cutter diameter Dc | 6 mm | |
| Cutting edge length Lc | 16 mm | |
| Head length L3 | 16 mm | |
| Burr, type of end face | without | |
| Twist direction | right-hand | |
| Burr shape | cylindrical burr | |
| Spacing of the cutters | unequal spacing | |
| Type of cut | single toothing | |
| Toothing grit designation | medium | |
| Interface | joint 1 | |
| Usable length L1 | 16 mm | |
| Overall length L | 50 mm | |
| Functional length | 16 mm | |
| Cutting direction | right-hand cutting | |
| Tool version | solid carbide | |
| Machining method | form milling (die milling) | |
| Type of product | burr |
Identification et classification
| Référence article | 540222 A0616 | |
| EAN / GTIN | 4062406586669 | |
| Réf. fabricant | 540222 A0616 | |
| Fabricant/personne responsable | Hoffmann Supply Chain GmbH & Co. KG, Poststra?e 15, 90471 Nürnberg, Deutschland, |
Tableau dapplication
» data-src= ».e/e/5/4/ee54e3e8-e5c5-4df4-b6d3-7d7b49baf5a4/ap60_at_fra_alu-mg.png » alt= »Alu Mg » = »lazy » />
