Description
Caractéristiques techniques
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Wet maximum | suitable | |
| Manufacturers designation | TOMT 060508ER-GM | |
| Dry machining | suitable | |
| Oil | suitable | |
| Air | suitable | |
| Base form | triangular | |
| Wide insert B | 11.6 mm | |
| Thickness of the insert S | 5.7 mm | |
| Length of cutting insert L | 11.6 mm | |
| Insert version | right-hand | |
| Length of cutting edge l | 11.6 mm | |
| Height of cutting edge | 5.7 mm | |
| Diameter of the cutting insert d | 7.2 mm | |
| Corner radius R | 0.8 mm | |
| Rake face chamfer width C | 0 mm | |
| Rake face chamfer angle | 0 degrees | |
| Rake angle | 0 degrees | |
| Setting angle | 90 degrees | |
| Normal clearance angle (main cutting edge) | 0 degrees | |
| Normal clearance angle (auxiliary cutting edge) | 0 degrees | |
| Normal clearance angle (flat cutting edge) | 0 degrees | |
| Cutting conditions | interrupted | |
| Cutting edge length, limited | 6 mm | |
| ISO-Code | TOMT 060508ER-GM | |
| Attachment hole diameter | 3.4 mm | |
| Type of chip breaker | GM | |
| Tool material | HC-P25 | |
| Standard designation for cutting medium, 2nd Priority | HC-M25 | |
| Standard designation for cutting medium, 3rd Priority | HC-K25 | |
| Machining group | K (cast iron); M (stainless steel); P (steel) | |
| Tool application group | P25; M25; K25 | |
| Cutting media, manufacturers designation | PR1525 | |
| Coating | Megacoat Nano | |
| Grade | PR1525 | |
| Insert thickness T | 5.7 mm | |
| Type of fastening for insert | S (with counterbore screwed through hole) | |
| Interface coding for insert | TO1205083R | |
| Interface coding for insert according to ISO TS 13399-60 | TO1205083R | |
| Insert designation | TOMT 060508ER-GM | |
| Type of product | Cutter insert | |
| With ISO code | yes | |
| Number of teeth | 3 pcs. | |
| Direction of action | right-hand | |
| Suitable for material | cast iron (K); stainless steel (M); steel (P) | |
| Tolerance Class | M | |
| Machining method | shoulder milling (FEC) | |
| Finishing / roughing assignment | Finishing; Roughing | |
| Type of fastening | Hole | |
| Chip breaker | yes | |
| Cutter version | rounded (E) | |
| Weight | 2900 g | |
| Content | 1 pcs. | |
| Correction factor fz | 2.5 |
Identification et classification
| Référence article | 226430 ST1400 | |
| EAN / GTIN | 4960664914319 | |
| Réf. fabricant | TLB40003 | |
| Fabricant/personne responsable | KYOCERA UNIMERCO Tooling GmbH, Hammfelddamm 6, 41460 Neuss, Deutschland, www.kyocera-unimerco.de |
Tableau dapplication
» data-src= ».a/b/1/5/ab15e96f-e2e5-4393-a3c7-beef3c08aaee/ap60_at_fra_hm-500n.png » alt= »Acier < 500 N/mm2" ="lazy" />
