Description
Caractéristiques techniques
| Base form | square | |
| Thickness of the insert S | 4.76 mm | |
| Length of cutting insert L | 12.7 mm | |
| Insert version | neutral | |
| Length of cutting edge l | 12.7 mm | |
| Diameter of the cutting insert d | 12.7 mm | |
| Corner radius R | 0.8 mm | |
| Rake angle | 20 degrees | |
| Normal clearance angle (main cutting edge) | 20 degrees | |
| ISO-Code | SEET 1204 ZZTN | |
| Type of chip breaker | UNI | |
| Wiper length axial Lwa | 8 mm | |
| Tool material | HC | |
| Machining group | K (cast iron); M (stainless steel); P (steel) | |
| Tool application group | P25-P35, M20-M30, K15-K25 | |
| Cutting media, manufacturers designation | Cermet | |
| Coating | uncoated | |
| Grade | CU7525 | |
| Insert thickness T | 4.76 mm | |
| Type of fastening for insert | S (with counterbore screwed through hole) | |
| Interface coding for insert | SEET 1204 ZZTN | |
| Interface coding for insert according to ISO TS 13399-60 | SEET 1204 ZZTN | |
| Insert designation | SEET 1204 ZZTN | |
| Type of product | Cutter insert | |
| With ISO code | yes | |
| Standard | DIN ISO 1832 | |
| Number of teeth | 4 pcs. | |
| Direction of action | neutral | |
| Suitable for material | cast iron (K); stainless steel (M); steel (P) | |
| Machining method | face milling (FPL) | |
| Finishing / roughing assignment | Finishing | |
| Type of fastening | Hole | |
| Chip breaker | yes | |
| Number of potential uses | 1 pcs. | |
| Content | 1 pcs. | |
| Correction factor fz | 2.5 |
Identification et classification
| Référence article | 214321 UNI | |
| EAN / GTIN | 4062406377267 | |
| Réf. fabricant | 214321 UNI | |
| Fabricant/personne responsable | Hoffmann Supply Chain GmbH & Co. KG, Poststra?e 15, 90471 Nürnberg, Deutschland, |
